Summary
Want to have positive impact working in diverse environments? Join us at IHS Sanitation Facilities Construction! We collaborate with American Indian Tribes to plan, design, and construct water, wastewater, and solid waste facilities. Visit or email .
The position is eligible for the IHS Student Loan Repayment Program with selection based on IHS priorities and available funds. Visit .
See Additional Info Section for other incentives
Duties
This position is being announced concurrently under Excepted Service/Merit Promotion Examining procedures. Please review vacancy announcement number IHS-25-HQ-12495162-ESEP/MP for eligibility requirements.
The incumbent will be responsible for leading collaboration with American Indian Tribes to increase and maintain access to water, wastewater, and solid waste facilities by:
- Performing professional engineering planning, design, and construction oversight activities for community and individual water supply, wastewater, and solid waste facilities to serve American Indian homes.
- Preparing project summaries, construction documents, and final reports. Ensuring accuracy of program data systems for assigned Tribes and communities. Ensuring that projects to address sanitation deficiencies are properly scoped, consistently scored, and have accurate cost estimates.
- Visiting Tribal communities where projects are being planned and constructed.
- Providing supervision and guidance to technical and administrative staff as a first level supervisor.
Requirements
Conditions of Employment
Selectee may be subject to a probationary period
U.S. Citizenship is required
Selective Service Registration is required for males born after 12/31/1959
Must have a valid State driver's License
This is a designated position covered by Public Law 101-630, requiring contact or control over Indian children. Due to this requirement, the agency must ensure that persons hired for these positions have not been found guilty of or pleaded nolo contendere or guilty to certain crimes.
A one-year supervisory/managerial probationary period may be required upon selection/placement.
Confidential Financial Disclosure Form required.
Successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit .
Must have a viable bank account at a financial institution for electronic direct deposit of salary payment.
Background Investigation: If you are selected for this vacancy, you must undergo a pre-employment fingerprint check and background investigation. Fingerprint results and background investigation documentation must be cleared prior to hire. After you begin your employment, your continued employment is contingent upon the outcome of a complete background investigation as determined by the sensitivity level of your position. The investigation must find that you are suitable for Federal employment in your position. If you are found not suitable, you will be terminated after you begin work. If you make a false statement in any part of your application, you may not be hired; you may be fired after you begin work; or subject to possible criminal charges. You may be subject to a credit check as a part of the background investigation process.
Qualifications
To qualify for this position, your resume must state sufficient experience and/or education, to perform the duties of the specific position for which you are applying.Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; social). You will receive credit for all qualifying experience, including volunteer and part time experience. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
BASIC REQUIREMENT(S):
A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
- Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
- Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
- Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
- Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive).
MINIMUM QUALIFICATIONS:
Your resume must demonstrate at least one (1) year of specialized experience equivalent to at least the next lower grade level in the Federal service obtained in either the private or public sector performing the following type of work and/or tasks: Experience in the preparation of design documents, construction drawings, technical specifications and procurement documents for water supply, wastewater, or solid waste construction projects
OR 3 years of progressively higher level graduate education leading to a Ph.D. degree,
OR Ph.D. or equivalent doctoral degree
OR a combination of specialized experience and education that meets 100% of the qualification requirements for this position
You must meet all qualification requirements within 30 days of the closing date of the announcement.
How You Will Be Evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
If you meet the minimum qualifications requirements for this position, your application will be evaluated and rated under Category Rating selection procedures. Once the application process is complete, a review of your qualifications will be conducted to determine if you are qualified for this job. Qualified candidates will be assigned to a quality category. The quality categories are: Best Qualified, Well Qualified, or Qualified. Within each of these categories, applicants eligible for veteran's preference will receive selection priority over non-preference eligibles.
Please note that if, after reviewing your resume and or supporting documentation, a determination is made that you have inflated your qualifications and or experience, your category rating can and will be adjusted to more accurately reflect your abilities, or you may lose consideration for this position. Please follow all instructions carefully. Errors or omissions may affect your eligibility.
To determine if you are qualified for this position, a review of your resume and supporting documentation will be made and compared against the qualifications as defined in the qualifications section of this vacancy announcement and your responses to the assessment questions. You will be rated based on the information provided in your resume (your resume must state specific duties that relate to this position) and your responses to the assessment questions will be evaluated against the duties you provided in your resume, along with your submitted documentation to determine your ability to demonstrate the following.
- Civil Engineering
- Managing Human Resources
- Project Management
- Written Communication
The following links below provide information on how you may be eligible for various hiring authorities. If you are a Veteran, qualified CTAP and ICTAP eligible, or an individual with a disability, please refer to the following links below for additional guidance. CTAP and ICTAP candidates will be eligible for selection priority if it is determined that they have exceeded the minimum qualifications for the position by attaining at least a "well qualified" rating of 85 out of 100. Information about CTAP and ICTAP eligibility is on the Office of Personnel Management's Workforce Restructuring Career Transition website at: . CTAP/ICTAP documentation requirements are listed in the "Required Documents" section of this announcement.
- Veterans, i.e. (VEOA, VRA, and 30% or more disabled) -
- Career Transition Assistance Program (CTAP) -
- Interagency Transition Assistance Program (ICTAP) -
- Schedule A Appointments for the Disabled -
Click here to view vacancy questions: . All documents above MUST be received by 11:59 pm (Eastern Standard Time) of the closing date of, 01/13/2025, to be considered.
Required Documents
Resume: You are highly encouraged to use USAJOBS Resume Builder to ensure all required information is included in your Resume. If you use your own resume, curriculum vitae, or any other written form you choose then you must describe your job-related qualifications that includes beginning and ending dates for paid and non-paid work experience, hours worked per week, month and year of employment for each job title listed, annual salary, and description of job duties. Include name and address of employer; supervisor name and telephone number.
Required as applicable for the purposes of specific eligibility and appointment claim(s), and position requirements:
Indian Preference Applicants: If claiming Indian preference, applicants must provide a completed copy of the Form BIA-4432, "Verification of Indian Preference for Employment in the BIA and IHS Only." Indian preference will not be given unless a properly signed and dated form is submitted with your application, including any verification by an authorized Tribal Representative or BIA Official of tribal enrollment records. For detailed instructions, see form BIA-4432. Refer to BIA-4432 link: . When an Indian Preference candidate possesses Veterans preference the rules regarding Veterans preference apply under ESEP and the applicant must provide documentation in order to receive preference.
Veterans Preference: If claiming Veteran's Preference provide a copy of your DD214 Form (Member 4 copy). To claim 10-Point Veterans Preference, submit a SF-15 Application () along with the appropriate supporting documentation. For additional information regarding Veterans Preference visit: .
Career Transition Assistance Program (CTAP)/Interagency Career Transition Assistance Program (ICTAP): If you are claiming CTAP/ICTAP, follow the instructions below: .
Transcripts: You are encouraged to submit copies of transcripts (official or unofficial) although not required at the time of application. You must list your courses including titles, credit hours completed, and grades. Official transcripts will be required after tentative selection and prior to issuing an official job offer.
Licensure, Certifications: Applicants should list their license/certifications on their resume, along with the expiration date, if applicable. Certification of licensure/certification will be required after tentative selection and prior to issuing an official job offer.
You must meet the requirements of the job by 11:59 (Eastern Standard Time) of the closing date:01/13/2025